Bobcat E17z mini excavator
The Bobcat E17z is a 1.7 tonne mini excavator with zero tail swing, so it can dig right up against a fence or wall. At 980mm wide with the tracks in, it fits through a lot of gates.

About the Bobcat E17z
The Bobcat E17z is a 1.7 tonne mini excavator with zero tail swing, so it can dig right up against a fence or wall. At 980mm wide with the tracks in, it fits through a lot of gates.
It digs to about 2.2 metres, which suits footings, trenches and digging out for slabs and pads.
Good for
- Footings for sheds, patios and walls
- Drainage trenches
- Digging out for slabs and pads
- Digging and clearing in tight backyards
Size and specs
- Size
- 1.7 tonne, zero tail swing
- Weight
- approx. 1,750kg
- Access width
- 980mm (tracks in)
- Dig depth
- approx. 2.2m
- Attachments
- Buckets
Sizes are manufacturer figures. Daily and weekly rates depend on the machine and the length of hire. Ask Ryan and you will get a straight price.
Will it fit through your gate?
Measure the narrowest point on the way in, including gate posts, meter boxes and latches. Then slide to your width and see which machines get through.
Drag the posts on the drawing, use the slider or type with the arrow keys.
Won't fit: Bobcat E17z
The gate is 30mm too narrow for the Bobcat E17z. The Kanga Kid gets through at 805mm.
Photos
Jobs for the Bobcat E17z
The work this machine is used for.
Footing excavationsFootings dug for sheds, retaining walls, patios and small builds. Neat, to the mark and ready for the next trade.See the details
Site prep & levellingLevelling, site prep, trenching for drainage and the rest of the dirt work that comes with a landscape or build.See the details
Yard clearingOvergrown, weedy or full of rubbish, we'll clear it back to dirt and take the spoil away so you've got a clean start.See the details
Narrow access earthworksSide gates and skinny backyards are what we're set up for. Our 805mm and 1030mm wide machines get in where the big diggers can't.See the details
Common questions
What is the narrowest gate you can get through?
Our narrowest machine, the Kanga Kid, is 805mm wide. The Bobcat E17z is 980mm with its tracks in, and the Kanga DW625 is 1030mm. Use the gate checker on this site to see what fits your access.
Can I hire a machine with an operator?
Yes. Dry hire is the machine on its own and you run it. Wet hire is the machine and an operator together, so the job gets done without you on the controls.
Do you drop off and collect the machines?
Yes. The Kangas travel on plant trailers and the Kubota rides on our truck. Ask Ryan about drop-off and collection when you book, and tell him your access width so the right machine turns up.
Want the Bobcat E17z?
Tell Ryan the dates, your suburb and the access width and you will get a straight answer.
0415 709 159Based in Craigie, working across Perth Metro.
Get a quote
Call Ryan on 0415 709 159 or use the quote form.






